www.directed.com
40
select siren sounds
z
The individual sounds the siren produces during an full trigger alarm can be
customized for owner recognition of an alarm trigger. For more information, see
programming note #3.
fact II on/off
z
On: The alarm will bypass for 60 minutes zones that are triggered three times
within a one hour period.
z
Off: The alarm will respond to zone inputs indefinitely without bypassing.
remote valet on/off
z
On: The alarm can be put into valet mode with the remote control.
z
Off: The alarm can not be put into valet mode with the remote control.
entry delay on/off
z
On: If the system has passively armed, it will not trigger for 15 seconds after a
door is opened allowing the user to enter the vehicle and disarm the system via
the PlainView 2 Valet switch.
z
Off: There is no entry delay when the system has passively armed. The system
will trigger instantly when a door is opened.
reset to default settings
z
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indicated in
bold lettering.
z
Press the arm/disarm button of the TX; the siren will chirp twice as confirmation.
panic on/off
z
On: The panic feature is available.
z
Off: The panic feature is not available.
auto start setting - off/battery only/temp only/battery and temp
z
This feature is only available with the IntelliStart option.
z
Off: The vehicle will not autostart.
z
Battery: The vehicle will only autostart when the car battery gets low.
z
Temperature: The vehicle will only autostart at a preset low temperature.
z
Battery and temperature: The vehicle will autostart with a low car battery or low
temperature.
