www.directed.com
34
arming
Zones that are triggered at the time the system is armed are reported by an addition-
al set of status chirps called Malfunction AutoBypass. The specific zone bypassed is
then reported by the LED. For more zone information, refer to
Table of Zones section
of this guide.
disarming
If a zone is triggered, three disarm chirps will sound. The specific zone that was trig-
gered is then reported by the LED when the ignition is turned on. For more zone infor-
mation, refer to the
Table of Zones section of this guide.
system status chirps
remote siren silencing
While the siren is sounding, press the arm/disarm button once to silence the siren but
leave the system in the armed state. To disarm the system, press the arm/disarm but-
ton a second time.
N
NO
OTTEE:: If the remote control battery is low, the siren will generate a single low pitched
chirp when disarming.
multiple event total recall
This will report the last eight system triggers.
1.
Press and hold
of the PlainView 2 Valet switch.
Action
No. of Chirps
Description
Arm
2
System armed.
Arm
4
System armed with hood or
trunk bypass zones 5 and 6.
Arm
2 (5-second pause) 4
System armed with door bypass zone 4
Arm
2 (10-second pause) 4
System armed with sensor active
and bypassed zones 1, 3, and 8.
Disarm
1
System disarmed.
Disarm
3
System disarmed with zone violation
