© 2003 directed electronics, inc.
49
5.
The lights will flash four times again. The sensor warn away and full trigger
zones are now bypassed.
6.
The sensor zones will reset when disarmed.
auto-immobilization feature
Immobilizer circuits automatically activate after 30 seconds.
N
NO
OTTEE:: H1/17 orange ground when armed will not activate during Auto-
Immobilization
auto-immobilization sequence
1.
Turn ignition off or disarm alarm
2.
After 30 seconds the systems Immobilization circuits activate and engage the
starter and ignition interrupt
3.
LED blinks at ½ normal speeds.
Disarm the system when immobilized
Use one of the following methods to turn off auto-immobilization
z
Turn ignition on and press the arm/disarm button of the transmitter.
z
Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the next time the
ignition is turned on.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or the remote con-
trol.
