ClientPOS PT6300 User Manual Download

Page: 82 / 95

ClientPOS

PT6300 User Manual

Version: 2.0

82 | 95

7-1-6 USB Configuration

Use the USB Configuration menu to read USB configuration information and configure the

USB settings.

USB Devices

The USB Devices Enabled field lists the USB devices that are enabled on the system

Legacy USB Support [Enabled]

Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB

keyboard does not become available until a USB compatible operating system is fully

booted with all USB drivers loaded. When this option is enabled, any attached USB

mouse or USB keyboard can control the system even when there is no USB driver

loaded onto the system.

Disabled

Legacy USB support disabled

Enabled

Legacy USB support enabled

Summary of Contents for PT6300
































































































Search results

Summary of Contents for PT6300

Reviews:

Related manuals for PT6300

Brands by name

Popular brands

ClientPOS PT6300, User Manual

Search results

Summary of Contents for PT6300

Reviews:

Related manuals for PT6300

Brands by name

Popular brands