WWW.CLF-LIGHTING.COM
8
If the fixture shall be lowered from the ceiling or high joists, professional trussing systems have to be used. The fixture
must never be fixed swinging freely in the room.
Caution:
Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of a
possible installation, do not install the moving head!
Before rigging make sure that the installation area can hold a minimum point load of 10 times the fixture’s weight.
When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in a distance of
min. 0.5 m.
Use an appropriate clamp to rig the fixture on the truss.
Follow the instructions mentioned at the bottom of the base.
Make sure that the device is fixed properly! Ensure that the structure (truss) to which you are attaching the fixtures is
secure.
The fixture can be placed directly on the stage floor or rigged on a truss without altering its operation characteristics .
For securing the fixture to the truss, install a safety wire which can hold at least 10 times the weight of the fixture. Use
only the safety wire with a snap hook with screw lock gate. Fasten the safety cable in the attachment point and around
the truss as shown on the picture below.
Rigging via omega bracket:
Truss
Safety chain
Clamp
Omega bracket with
Quicklock # 520114/520113
(accessoires)
