WWW.CLF-LIGHTING.COM
12
control panel
Here you can set all functions for the fixture.
FANS
Regulated = power : Min 84.5%, FAN : variable
Full = power : Min 84.5%, FAN : 4000RPM
Silent 1 = power : Min 60%, FAN : 2240RPM
Silent 2 = power : Min 40% ,FAN : 1840RPM
Dimmer speed
“Normal” means select linear dimming, or choose dimmer 1-4 to control the dimming speed, dimming 1 of the
fastest dimming curves, 4 for the most slowly dimming curve.
Dimmer curve
Linear / Square law / INV Square law / S- Curve / Special
WDMX Reset
Reset the Wireless Board
LED Calibration
Normal = Color calibration mode off
FACTORY = Factory calibration mode, All colors are calibrated
Refresh rate
Controls the flicker frequency of the fixture
1200 / 2400 / 4800 / 10000 Hz
DMX HOLD
DMX HOLD = The fixture will remember on last values when you disconnect DMX
NO DMX HOLD = The fixture has no output when you disconnect DMX
Display
Rotate:
Auto=
Normal
=
Background Light:
always on =
Auto off =
BL blinking when no DMX :
Yes =
NO =
Auto Display Flip Function enabled
Auto Display Flip Function disbaled
Display background Light always on
Display deactivation after approximately 15 second of inactivity
When there is no Dmx , the dmx value will be blinking on main menu
When there is no dmx , the dmx value will be static on main menu
Indicator Light
On = When the display is standby, there are 2 low brightness dots visible to show that the fixture is on and dmx
Off = When the display is standby, no dot visible to show
Zoom Option
Normal= zoom max 37,6°
Wide= zoom max 40°
KEY-Lock
Locks all the button functions. Standard unlocking password is
(MENU+UP+MENU+DOWN+MENU+UP+MENU+DOWN+ENTER)
Font selection
Select display font
Personality
