Clenergy Australia
| 1/10 Duerdin St, Clayton VIC 3168 | T: +61 3 9239 8088 | [email protected]
Page 18 of 18
7. Warranty
10 year limited Product Warranty, 5 year limited Finish Warranty
Clenergy co. Ltd warrants to the original purchaser (“Purchaser”) of product(s) that it
manufactures (“Product”) at the original installation site that the Product shall be free
from defects in material and workmanship for a period of ten (10) years, except for the
anodized finish, which finish shall be free from visible peeling, or cracking or chalking
under normal atmospheric conditions for a period of five (5) years, from the earlier of 1)
the date the installation of the Product is completed, or 2) 30 days after the purchase
of the Product by the original Purchaser (“Finish Warranty”).
The Finish Warranty does not apply to any foreign residue deposited on the finish. All
installations in corrosive atmospheric conditions are excluded. The Finish Warranty is
VOID if the practices specified by AAMA 609 & 610-02 – “Cleaning and Maintenance
for Architecturally Finished Aluminum” (www.aamanet.org) are not followed by
Purchaser. This Warranty does not cover damage to the Product that occurs during its
shipment, storage, or installation.
This Warranty shall be VOID if installation of the Product is not performed in
accordance with Clenergy’s written installation instructions, or if the Product has been
modified, repaired, or reworked in a manner not previously authorized by Clenergy IN
WRITING, or if the Product is installed in an environment for which it was not
designed. Clenergy shall not be liable for consequential, contingent or incidental
damages arising out of the use of the Product by Purchaser under any circumstances.
If within the specified Warranty periods the Product shall be reasonably proven to be
defective, then Clenergy shall repair or replace the defective Product, or any part
thereof, in Clenergy’s sole discretion. Such repair or replacement shall completely
satisfy and discharge all of Clenergy’s liability with respect to this limited Warranty.
Under no circumstances shall Clenergy be liable for special, indirect or consequential
damages arising out of or related to use by Purchaser of the Product.
Manufacturers of related items, such as PV modules and flashings, may provide
written warranties of their own. Clenergy’s limited Warranty covers only its Product,
and not any related items.
Watertorque Group
Address: Lot 1 Brand Highway Muchea WA 6501
Phone: (08) 9195 0351
Email: [email protected]
