Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
16
page
of 25
Installation Instruction
5.3.4 Apply one pre-assembled Grounding Lug per
Rail. Click the Grounding Lug into to the rail channel
and insert the Copper Wire. (the maximum size is 4
mm2 or similar) Fasten the bolt M6*14 with 5~6 N.m
and the bolt M8*25 with 16~20 N.m as shown in the
figure on the right.
Copper Pipe will be supplied for the case that using
small size Copper Wire.
There are three solutions for Grounding Lug
installation
-Solution 1
Fix the Grounding Lug at the end of Rail as shown
in the figure on the right.
-Solution 2
Fix the Grounding Lug at the Rail where just under
the PV Module as shown in the figure on the right.
-Solution 3
Fix the Grounding Lug at the side channel of Rail
as shown in the figure on the right.
20mm
