manualshive.com logo in svg

Clemco ZERO Pulsar III-P, Manual

The Clemco ZERO Pulsar III-P is a highly efficient manual blasting machine engineered to deliver exceptional performance. This product boasts advanced features and durability, making it a favorite among professionals. Experience the power of the ZERO Pulsar III-P with a free, downloadable user manual available exclusively at manualshive.com.

Share
Download
background image

 

PULSAR

®

 III-P/III-PE and VI-P/VI-PE PRESSURE CABINETS 

Page 35

 

 

 

 

 

 

© 2019 CLEMCO INDUSTRIES CORP.  

  www.clemcoindustries.com  

  Manual No. 21527, Rev. I, 02/19

 

Turntable  with  Workcar  and  Track,  500  lb.  Capacity 
Figure 39 

 

Item 

Description 

Stock No.

 

 

 (-) 

20" diameter turntable and track assembly 

 

for Pulsar III models  .............................. 13530 

 

for Pulsar VI models  .............................. 12835 

 (-) 

30" diameter turntable and track assembly 

 

for Pulsar VI models only  ...................... 24045 

 (-) 

Turntable and workcar replacement 

 

20" diameter  .......................................... 24205 

 

30" diameter ........................................... 24086 

  1. 

Turntable replacement 

 

20" diameter  .......................................... 18329 

 

30" diameter  .......................................... 21390 

  2. 

Bearing, 1-1/2" bore  .................................. 11517 

  3. 

Protector, bearing  ..................................... 13479 

  4. 

Screw, 1/2-NC x 1-1/2" cap  ...................... 03454 

  5. 

Washer, 1/2" lock  ...................................... 03516 

  6. 

Nut, 1/2-NC hex  ........................................ 03511 

  7. 

Caster, 4" V groove  .................................. 11594 

 
All  other  track  items  are  special  order.  Contact 
distributor for price and availability. 
 
 

 

 

Figure 39 

 

 

Description

 

Stock No.

 

 

Conversion kit, Pulsar

®

 VI-P pressure blast to 

suction blast - Includes all accessories to convert 
pressure system to suction system  ....................... 21666 

 

Conversion kits, Sentinel Metering Valve 
  To convert from fine-mesh media to coarse  ...... 22848 
  To convert from coarse-mesh media to fine  ...... 22849

 

 

Noise-reduction arm port covers, pair  ................... 24885 
Lock pins (pkg. of 25) for twist-on couplings  ......... 11203 
Safety cable, 1/2" to 1-1/4" OD hose  ..................... 15012 
Window cover lens, pkg. of 5  ................................ 06190 
Manometer kit (flexible u-tube)  .............................. 12528 
HEPA Filter assembly, top mount  ......................... 22807 
Automatic pulse kit  ................................................ 21773 
Time delay door locks, for both doors  ................... 24163 
Armrest assembly, includes mounting hardware  .. 24900 
Armrest, replacement  ............................................ 24899 
Anti-fatigue floor-mat, 2-foot x 3-foot 

for front of cabinet  .............................................. 24744 

 

Pass-thru door, with 15-inch-square cut-out 
  Right door 
 

for Pulsar III  ..................................................... 23610 

 

for Pulsar VI  .................................................... 23612 

  Left door 
 

for Pulsar III  ..................................................... 23611 

 

for Pulsar VI  .................................................... 23613 

 

Steel media kits, Pulsar VI-P conventional 
  Factory installed  ................................................. 21797 
  Field Installed *included with field installed kits .. 21798 
 

4" universal cabinet hopper adaptor  ............... 23295 

 

*Gasket, hopper outlet adaptor  ....................... 23258 

 

4" reclaimer inlet-pipe adaptor  ........................ 12350 

 

*Gasket, inlet-pipe adaptor  ............................. 11779 

 

4" light-lined hose, 7 feet required  .................. 12466 

 

Black-rubber curtain set  .................................. 23532 

 

Steel media kits, Pulsar llI-P conventional 
  Factory installed  ................................................. 28084 
  Field Installed *included with field installed kits  . 28085 
 

4" universal cabinet hopper adaptor  ............... 23295 

 

*Gasket, hopper outlet adaptor  ....................... 23258 

 

4" reclaimer inlet-pipe adaptor  ........................ 12350 

 

*Gasket, inlet-pipe adaptor  ............................. 11779 

 

4" light-lined hose, 7 feet required  .................. 12466 

 

Black-rubber curtain set  .................................. 23531 

 

Differential pressure gauge assemblies 
  Reclaimer, measures static pressure  ................. 23355 
  Dust collector, measures drop across filter  ........ 23356 

 

Boron carbide lined nozzle  
  CTB-2, 1/8" orifice  .............................................. 21090 
  CTB-3, 3/16" orifice  ............................................ 21091 
  CTB-4, 1/4" orifice  .............................................. 21092 

 

3 

1 

6 

5 

4 

2 

7 

Summary of Contents for ZERO Pulsar III-P












































Reviews:

No comments

Related manuals for ZERO Pulsar III-P

Oasser P1 Operation Manual preview
P1
Brand: Oasser Pages: 29
Park Tool DT-4 Manual preview
DT-4
Brand: Park Tool Pages: 4
Park Tool CRC-1 Manual preview
CRC-1
Brand: Park Tool Pages: 2
Veit 8905 Original Instruction Manual preview
8905
Brand: Veit Pages: 70
Powerfix Profi PLPRS A1 Operating Instructions Manual preview
PLPRS A1
Brand: Powerfix Profi Pages: 75
Palmgren 9618602 Operating Manual preview
9618602
Brand: Palmgren Pages: 4
Paslode PA-200/50-S16 Operating Manual preview
PA-200/50-S16
Brand: Paslode Pages: 24
Skil 3280 CA Original Instructions Manual preview
3280 CA
Brand: Skil Pages: 128
BK Precision 1715A Instruction Manual preview
1715A
Brand: BK Precision Pages: 25
NORDFOREST Titan 80 Operating Manual preview
Titan 80
Brand: NORDFOREST Pages: 274
Baileigh Industrial TN-250 Operator'S Manual preview
TN-250
Brand: Baileigh Industrial Pages: 20
Worcraft MF-300A Manual preview
MF-300A
Brand: Worcraft Pages: 32
RAASM s.290 Original Instructions Manual preview
s.290
Brand: RAASM Pages: 56
Monti Bristle Blaster Electric Operating Instructions Manual preview
Bristle Blaster Electric
Brand: Monti Pages: 13
Bavaria BAS 14,4 Operating Instructions Manual preview
BAS 14,4
Brand: Bavaria Pages: 34
Hytorc LITHIUM II Series Basic Operation Manual preview
LITHIUM II Series
Brand: Hytorc Pages: 36
unicraft WPP 15 TE Operating Instructions Manual preview
WPP 15 TE
Brand: unicraft Pages: 20
Parkside 311369 1904 Translation Of The Original Instructions preview
311369 1904
Brand: Parkside Pages: 60

Brands by name

Popular brands

Load more brands