SAFETY
GIAMPY
Rev. 00
15/02/2012
Pag. 18/43
Don’t use the machine to clean up areas exceeding 5% of sloping or presenting
holes, and depressions which might compromise the stability of the machine.
FIORENTINI decline every responsibility for accidents to persons or things using the machine
on surfaces that can compromise the stability of the same one. The operator has to follow
recommendations about areas conditions on which he has to work.
3.8. SAFETY SIGNALS
Safety signals include :
DANGERS
Signals are triangular shaped with black
colored in yellow field pictograms
PROHIBITIONS
Signals are circular shaped with black colored
in white field red-crossed pictograms
In case of wear and tear, the purchaser must re-establish similar signals of danger.
It’s absolutely forbidden to keep out or to temper with these signals.
What is it ?
This signal shows crushing dangers due to moving parts of the machine.
What to do?
In phase of installation/maintenance we recommend to keep away the
ignition key from the control board.
What is it ?
This signal shows the prohibition to remove covers in which members
are still moving.
What to do?
In phase of installation/maintenance we recommend, to remove
mobile protections, to disconnect the ignition key from the control
board. When the machine is in action not enter with body’s parts and
make sure that all covers are well fixed.
