FUNCTIONING
GIAMPY
Rev. 00
15/02/2012
Pag. 31/43
4.7.8 BRUSH REPLACEMENT
-
With one brush version
To substitute the brushes do as it follows:
Remove the ignition key to avoid casual starting.
Empty both recoveries of the machine.
Lift up the machine.
Release the brushes pulling them to the bottom.
To insert a new brush is necessary to place it underneath the plate, then pushing it on. (detail 1
picture 4.14).
-
Two brushes version
To substitute the brushes do as it follows:
Remove the ignition key to avoid casual startings.
Remove the protection pulling it out (particular 1 picture 4.15).
Release the brushes pulling them to the bottom.
to insert a new brush, is necessari to centre the fitting flange inside the hexagon of the brushes with
a two hands pression to the top (particular 2 picture 4.16).
After have fit the brushes, reinsert the protection pushing to the machine.
PICTURE N° 4.14
1
1
2
PICTURE N° 4.15
PICTURE N° 4.16
