19
EN
Attaching the Wall Bracket
PLEASE NOTE!
■
Use the fastening material supplied to hang up the wall bracket. If you are unsure
whether the fastening material supplied is suitable for your wall, seek advice from a
specialist stockist.
■
Hang the wall bracket in a secure and solid place.
■
Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Place the wall bracket (
D
) against the wall and mark out two drill holes (at the top
and bottom).
2. Drill holes into the wall and place dowels in them.
3. Screw the wall bracket onto the wall.
Accessories
• The
micro
fi
bre
fl
oor nozzle
(
I
) is suitable for both carpets and hard
fl
oors. It has a
rotating micro
fi
bre roller and is thus particularly suitable for delicate
fl
oor surfaces.
The LEDs illuminate dark areas, to allow even more thorough cleaning.
• The
brush nozzle
(
A
) is used for vacuuming upholstery and textiles and for removing
dust from delicate objects such as picture frames, lamp shades, keyboards, books
etc.The brush head can be pivoted 360°.
• The
crevice nozzle
(
B
) is suitable for places which are hard to get to, such as cor-
ners, crevices or recesses, e.g. for upholstery and cleaning the inside of cars.
• The
extension tube
(
H
) makes it easier to reach the tops of cupboards, ceilings and
corners and, along with the electric
fl
oor nozzle, allows
fl
oors to be cleaned.
• The
holder for the brush and crevice nozzle
(
C
) is suitable for securing the two
nozzles to the extension tube easily to save space.
• The
wall bracket
(
D
) is suitable for storing the device in a space-saving manner. The
mains cable of the mains adapter (
E
) can be tucked in on the small hook on the wall
bracket.
Assembly
Attaching / Detaching the Micro
fi
bre Floor Nozzle and Extension Tube
• The
micro
fi
bre
fl
oor nozzle
(
I
) and the extension tube (
H
) are plugged directly onto
the suction opening (
12
). They must engage audibly. Attach the
micro
fi
bre
fl
oor noz-
zle to the extension tube in the same way.
• To detach it, press the release button (
13
) above the suction opening and pull the
micro
fi
bre
fl
oor nozzle or the extension tube out at the same time.
05980_inlay_de-en-fr-nl_A5_V1.indb 19
05980_inlay_de-en-fr-nl_A5_V1.indb 19
20.01.2020 10:24:45
20.01.2020 10:24:45
