4. Remove and Install the Side Brush
Use a screwdriver to remove the
screw then remove the side brush.
Use the screwdriver to reinstall the
side brush and secure the screws.
* Noted the difference between
left/right side brush.
R
L
3 Cleaning the Roller Brush
.
When the roller brush is dirty or tangled with hair, please follow the below instructions to clean it.
1. Turn off the robot.
2. Take out the roller brush.
3. Use the Cleaning Tool to cut tangled hair and remove other debris.
4. Install the roller brush and make sure the cover is properly locked.
2
-
1
2
-
2
2
-
3
3
4
-
1
4
-
2
Pull up the snap-fit
18
C L E A N M A T E
