background image

Important Safety Instructions

      Please read the following safety and operation instructions thoroughly before using this robot. Warranty service 

      is not available for improper usage.

      Please keep this manual for future reference.

      To avoid electric shock, do not expose the electronics of your robot, and use indoors in dry location only.

Prohibition

01. Children under the age of 8 or persons with reduced physical, sensory or mental 

      capabilities should not use this robot without the supervision of parents or others.

02. Do not disassemble, fix or remodel any part of this robot.

03. Never touch the battery charger pod with any metal or electricity-conducted stuff.

04. Never touch the robot and any other parts with wet hands, including the battery charger, 

      power plug and power cord.

05. Avoid to put heavy stuff onto the power cord which might damage it.

06. Do not leave the robot outdoors.

07. Do not use this robot near any possible hazardous or explosive places.

08. Do not stand on the robot.

09. ONLY use attachments, accessories and spare parts authorized by the manufacturer.

10. Do not use this robot in the places near any volatile materials.

11. Do not use the robot in a moist or wet environment.

12. Do not spray or pour liquids on your robot.

13. Do not expose to direct sunlight, use in room temperature environment only.

14. Do not use the robot to pick up sharp objects, glass, or anything that is burning or smoking.

15. Do not use this device to pick up spills of water bleach, paint, or anything wet.

16. It's not recommended to use the robot on long-pile carpet which it might get stuck.

17. Be aware of the robot while it's working, be careful not to step on it.

18. Do not use recharging base, power cord or plug if they're damaged, they must be replaced.

19. Do not heat up the battery or immerse the battery pack in any liquid. 

      Do not crush the battery.

 Before using the robot, it is suggested to clean up clothing, papers, plastic bags ,pets' dirt, 

     toys and fragile objects on the ground.

 Tidy up small items, such as power cords, cables, and loose fringes of rugs to prevent any 

     possible stuck.

 Tidy up long-sagged curtains.

Caution 

Caution Notice ( Battery ):

 Check the battery pack for any sign of damage or leakage. Do not charge damaged or leaking battery 

   packs in case of fire or explosion.

 If the robot won't be used for a long period of time, unplug the power cord and remove the battery from 

   the robot then store it in a cool, dry place.

 Wrap the contact pods before recycle or discard the battery.

 If the skin or eyes is exposed to the leakage of the battery, wash the affected area with large amounts 

   of water and seek medical advice.

 When the battery is obsolete, do not discard it to the garbage bin which could cause environmental 

   pollution. You may send it back to local recycle center, repair center, or assigned agents for disposal.

02

C L E A N M A T E

Summary of Contents for QQ9





























Reviews: