Remote Control
1. Power Button
On : LCD displays all function icons. The remote will enter standard
mode in one second.
Off : LCD display is off. The remote will enter power-saving mode.
* In standby mode, you can schedule cleaning, choose cleaning
2. Enter Button
After setting local time and cleaning schedule, press to save all settings.
* The robot will beep once after setting.
3. Start/Stop Button
The robot will always start with Auto Mode.
4. Direction Buttons
Use to control direction.
* You can control the robot when returning home or under standby mode.
5. Cleaning Standard Button
Quick Cleaning --- 1 cleaning cycles(Default)
Remote Control Function
Remote Control Connection
The remote control already installed with two AAA batteries.
If the remote doesn't work, try to install again or replace the
batteries.
Bring the remote control close to the robot within the range of 1 meters. Press both and
for 3 seconds. The remote control enters connection mode. As soon as the connection is
completed, the robot will beep 3 times.
Standard Cleaning —
2 cleaning cycles
Extra Cleaning --- 3 cleaning cycles
6. Time Setting Button
Press once to enter / exit local time setting process.
7. Anti-Collision Button
Press to turn on/off anti-collision function.
8. Cleaning Mode Button
Press to choose from these cleaning modes: Spiral/Wall-following/Zig-zag/Auto Mode.
9. Auto-Recharge Button
The robot will start searching for the Recharging Base automatically.
10. Schedule Cleaning Button
Press once to enter/exit scheduled cleaning setting mode.
For 6.10., you can adjust the time by using the direction buttons.
1
2
10
9
8
3
4
5
6
7
13
C L E A N M A T E
