Mop Module
1. Separate Design of Wet and Dry Mop-Mop first with wet mop, then clean with dry mop.
2. Adjustable Water Volume-The water supply will stop when power off.
3. Large Water Tank-Supply 200mL water for 60-90min.
Add Water to the Tank
Tilt the water tank so that the water
can flow into the front left corner.
(Do not exceed the high water line)
Install the Water Tank
Fit the back part of the robot
on top of the water tank
Press down to fit the robot
and the tank completely.
Replace the Mop
Separate the water
tank from the module
Place the mop to fit
into the corners.
Attach the microfiber mop to the
mop plate. (Do not cover the wheel)
Fill up the water to the front right
corner and close the tank cap.
High Water Line
DO NOT block the vent
Open the tank cap, and
add water into the tank
Put the water tank on the floor
Lift the robot and
press the water tank
Mop Module Features
16
C L E A N M A T E
