Cleanco Compact 45, Owner'S Manual, Page: 26 / 84

25
PROBLEM CAUSE SOLUTION
Plugged orifice and/or screen Unplug or replace orifice and/or screen
in the cleaning tool.
Inlet strainer is clogged. Inspect all lines, remove accumulated
debris which is blocking proper flow.
Loss of solution Replace and defective hoses. Remove,
volume at cleaning inspect, and clean the strainer screen.
tool orifice. De-scale unit and install a water
softener, if necessary.
Water gauge reads Defective quick-connect on Replace defective quick-connects(s)
normal. one or more of the high on high pressure hose(s).
pressure hoses.
Cleaning tool valve is Repair or replace valve.
malfunctioning.
Hose inner lining is Remove restriction or replace hose.
constricted.
Air leak in chemical supply Check for air leaks. Replace faulty
line, metering valve. parts.
Vacuum gauge is giving an Examine the tubing between the
improper reading. vacuum relief valve and the vacuum
gauge and remove any blockage.
Vacuum hose(s) is damaged, Inspect hose(s), repair or replace.
causing a suction leak.
Waste tank gaskets not Inspect the gasket. Repair seal or
sealing properly, not replace. Re-position lid(s).
positioned properly.
Plugged vacuum hose or Unplug vacuum hose or lint basket.
Loss of vacuum vacuum plumbing between
vacuum inlet and lint
While cleaning, the basket.
Vacuum is not up
to
Waste tank filter or lint Clean or replace filter. Clean lint
specification. basket is plugged. basket.
Engine RPM is Loose vacuum pump drive Tighten the drive belts.
Normal. Belts.
Waste tank drain valve is Drain the waste tank. Close drain
damaged or left open, causing valve, if open. Remove the dump
a vacuum leak. Valve and, after inspecting, replace
the defective components.
Vacuum relief valve requires Re-adjust the vacuum relief valve. If
adjustment or has a vacuum the vacuum does not increase, remove
leak due to damaged and inspect the relief valve diaphragm.
Diaphragm. If damaged, replace.
Vacuum pump is worn out. Replace the vacuum pump.