CONDENSATE PUMP INSTALLATION
IO-DV090
IO-DV090
WWW.CLEANCOMFORT.COM
17
Step 1.
Lay the DV090 unit on it's side. Make sure
the filter door is facing upward. Note the locations of
the four leveling feet and the hose adaptor.
Step 2.
Partially screw in the leveling feet at the four
locations.
Step 3.
Hand tighten the hose adaptor to get the
threads started. Turn clockwise.
Step 4.
Use adjustable pliers to finish tightening.
Fully seat the drain adaptor so that no leaks occur.
Step 5.
Install a sufficiently long drain hose to connect
the drain adaptor of the dehumidifier to the condensate
pump reservoir using field-supplied fittings.
Step 6.
Attach a drain hose to the condensate pump
and route it to a floor drain
.
Step 7.
Use a level to ensure the dehumidifier is
level before powering up the dehumidifier and the
condensate pump.
Step 8.
Plug in the condensate pump and the
assembly is completed.
Annual inspection of a properly
functioning pump is necessary.
CONDENSATE PUMP INSTALLATION
A condensate pump must be installed with leveling feet.
Do not use casters.
Depending on the specific model you have purchased,
the base of the humidifier may look different than shown in the pictures below.
