background image

CONTROLS

Dehumidifier

RE

D

YELLOW

BLU

E

GREEN or BROW

N

WHITE

Internal Connections

OPTIONAL

DAMPER

24 

VA

C

DMP  COMP  FAN

DVP-4034748 

or

DVP-4034753

IO-DV090

IO-DV090

WWW.CLEANCOMFORT.COM

11

The DV090 dehumidifier is controlled using five,  

color-coded wires:

Green (or brown)

 = Fan control 

Blue 

= Dehumidification (fan and compressor) control 

Red

 = 24VAC power transformer neutral side  

(common with white)

White 

= 24VAC power transformer  

neutral side (common with red)

Yellow

 = transformer high side 

Figure 7:

 Wiring Connection for DV090 Dehumidifier and DVP-4034748

I

 

CAUTION!

 

If an optional damper is not used, do not connect the 

 

white wire to the DVP-4034748 control or damage to 

 

the transformer may result.

I

 

CAUTION!

 

DO NOT allow the yellow lead from the unit to contact  

 

the red lead or the white lead from the unit or damage  

 

to the transformers will result.

A 40VA transformer is wired between the red/white lead 

and the yellow leads of the DV090. This low voltage power 

source powers the relay coils which control the fan and 

compressor. This 24VAC transformer can also be used to 

power HVAC accessories external to the dehumidifier.
•  To turn the dehumidifier ON make  

contact between yellow and blue wires.

•  To turn the fan ON make contact between yellow and 

green(or brown) wires.

•  To power an HVAC accessory, connect the accessory to 

the white (or red) wire and the yellow wire.

Summary of Contents for DV090





















Reviews: