25
CLAYDON TRAILED 4 METRE
Hybrid Seed Drill
Use the navigation keys (2) to select the function and switch the function on or off.
1. Marker Delay A
2. Marker Delay B - By default both are set to 0.0 seconds. When marker operation is set
to AUTO the markers sequence automatically as the drill is lifted and lowered. With the
timer set to 0.0s as soon as the drill is lifted the marker selection switches if the value is set
between 0.1 and 9.9 this is the delay between the drill being lifted and the marker control
switch to the other marker. Use the number key pad to enter the required delay and press
the enter key to store the setting.
3. Auxiliary Config – takes you to the configuration page for the auxiliary functions.
4. Folding – used to select the folding functions – NOT USED ON CLAYDON MACHINES MUST
BE SET TO OFF,
5. Folding Config – NOT USED ON CLAYDON MACHINES
6. Lift Inhibit – When switched to ON this function allows the operator to select the lift inhibit
function on the main screen to pull in the markers without raising the drill for passing
infield obstacles. Switched to OFF if the drill is not fitted with markers.
On pressing the Setup Menu key the screen displayed in Figure 22 will be shown, shortcut
keys are now present along the bottom of the screen; the corresponding buttons are
positioned directly under each option.
1. Calibration check button
2. Shortcut to manual calibration screen
3. Tramline Setup
4. Alarms Setup
5. Data Logging and Variable Rate
functions
Figure 22 – Shortcut keys within setup menu
The Calibration check option will be discussed in greater detail after the calibration
procedure has been described. The Tramline and Alarms Setup menus will be explained
in the following sections, for further information on the remaining Setup screens please
consult the RDS manual.