About the programs
Complete sound settings are stored in the
Program memory
of the
Nord Electro 3. This memory area has 128 locations that are numbered
1A, 1B, 2A, 2B, etc up to 64B.
The
Electro 3 HP
organizes the memory in 32 banks with 4 programs
each.
Every program can be edited and replaced as you wish. A complete
set of the factory programs are available on the Nord DVD that accom-
panies the unit and on our website.
Select a program
Press the
Up
or
Down
button repeatedly until you’ve selected the
desired program number. The program will be loaded immediately.
Press the
Prog A
or
Prog B
buttons to quickly switch between the
program number A or program number B. Press
Shift
and
Up/Down
to scroll continuously in the program bank.
Select a program
Use the Up/Down buttons on the Nord Electro 3 HP to select the bank
and the program buttons 1 ~4 to select the programs within each
bank.
Edit a program
Editing a program is just as easy as grabbing a knob and change a set-
ting, or press a button to select a different setting. The knob’s physical
position isn’t always as the stored setting in the program that is active,
but as soon as you start turning a knob, the parameter will snap to the
knob’s position.
When you have edited a program, a dot will appear in the lower right
display corner next to the program number. This will alert you to the
fact that the program has been edited but not yet saved. If you select a
new program without saving, any edits you have made will be lost and
the program will have its original settings the next time you select it.
only
4
Getting Started
Let’s take a few minutes to get familiar with the Electro 3. The user interface is designed to be as intuitive as possible, and to perform as well as you
do in a live situation. We hope that you soon will feel confident in using it, and by following this short chapter, we will go through most of the functions.
8 | NORD ELECTRO 3 USER MANUAL OS V3.X
Summary of Contents for Nord Electro 3
Page 28: ......
