CLAS PE 6001, Manual

Page: 11 / 32

PE 6001
DOUBLE SCISSOR LIFT 3T
Read carefully and completely this chapter since important information is included about
the operator safety in the case of improper use of the lift.
In the following text there are some clear explanations regarding certain situations of risk
or danger that may arise during the operation or maintenance on the lift, the safety devices
installed and the correct use of such systems, residual risks and operative procedures to use
(general precautions used to eliminate potential hazards).
Lifts are designed and built to lift vehicles and hold them in the elevated position in an enclosed
workshop. All other uses of the lifts are unauthorized. In particular, the lifts are not suitable for:
- Washing spray work;
- Creating raised platforms for personnel or lifting personnel;
- Use as a press for crushing purposes;
- Use as elevator;
- Use as elevator for single parts of vehicles.
The manufacturer is not liable for any injury to persons or damages to vehicles and to other
property caused by the incorrect and unauthorized use of the lifts.
During lifting and descendant phases, the operator must remain in the control station, like the
diagrams illustrates.
As the diagrams illustrate, the presence of persons inside the indicated danger zone is strictly
prohibited. Persons are admitted to the area beneath the vehicle only when the vehicle is already
in the elevated position, when the platforms are stationary, and when the mechanical safety
devices are firmly engaged.
DO NOT USE THE LIFT WITHOUT THE PROTECTION DEVICES OR WITH THE PROTECTION DEVICES
INHIBITED. FAILURE IN FOLLOWING THESE RULES CAN CAUSE SERIOUS INJURY TO PERSONS,
AND IRREPARABLE
DAMAGE TO THE LIFT AND/OR TO THE VEHICLE BEING LIFTE