CLAS PE 6001, Manual

Page: 10 / 32

PE 6001
DOUBLE SCISSOR LIFT 3T
Motor
Type
Power
Voltage
Current
Frequency
Poles
Speed
Building shape
Energy efficiency Class
ML90L
2.2kw
AC 400 or 230V ±5%
400V: 5A 230V: 10A
50Hz /60 Hz (optional)
3+N+PE
1400 r/min
B14
F
Pump
Type
Model
Flux
Joint type
Safety valve
Setting pressure
Adjustable working pressure
Suggested pneumatic pressure(M)
hydraulic pump
P4.3
4.3cc/3.7cc (60Hz)
direct connection
280 bar
150~300 bar
6 bar
Requirements:
Concrete type 425#, drying time 15 days
Clean the basic layer before installing the lift. -Thickness of concrete
≥
150mm, leveling of
whole length
≤
5mm.
Note: The ending part of the lift platform nr. P1 and nr. P2 represents the concrete structure. When the thickness
of the inside level ground is less than 150mm, the end of P1 and P2 should be taken to 2500×2500mm length
and the thickness of the concrete should be taken to
≥
150mm.
The minimum thickness of the concrete, and its right leveling, are main keys to complete the alignment operation
successfully.
TYPES OF VEHICLES THIS LIFT IS SUITABLE FOR:
THE LOWER PARTS OF THE VEHICLES, LIKE SPORTIVE CAR UNDERBODY, COULD INTERFERE WITH SOME
STRUCTURAL PARTS OF THE LIFT.
The lift will also handle customized or non-standard vehicles assuming they are within the maximum specified
carrying capacity.
Also the personnel safety zone must be redefined in relation to vehicle with unusual dimensions.
INSTALLATION SCHEME FOR SCISSOR LIFT