11
E
N
G
LI
S
H
fig. 12
• The surveillance camera can be connected to the video player, TV, PC etc.
• Set the pictures by turning the buttons: [V-Hold], [BRIGHT] and [CONT] on the
back of the screen.
• The camera is provided with 8 IR light emitting diodes for use in the dark, the
picture may flicker more if the camera is used in a completely dark room.
• The camera picture can be switched off when required: Press [SCREEN] to
switch off the image, press once more to show the image again. This helps to
save the screen battery. Outlets [AUDIO] and [VIDEO] produce output even if
the picture is switched off.
6. Consider the following
Consider and try out alternative positions before the final assembly. Position the
camera and screen as high as possible so as to avoid interference and so that the
camera settings cannot be altered easily by unauthorised persons.
Microwaves and other wireless products may interfere with the wireless transferen-
ce; choose an alternative position for the camera or microwave oven/other wireless
products.
Aerial setting
Turn and point the screen antenna towards the camera so that the curved side of
the antenna is pointing straight at the camera. Lower the antenna if the distance
between the camera and screen is less than 3 metres.
NB! The antenna can only rotate once; do not turn further if you feel resistance as
this can result in the antenna breaking.
