6
E
N
G
LI
S
H
fig. 4
fig. 3
Channel 4
ON
DIP
Channel 3
Channel 2
Channel 1
3. Select the channel
Screen and camera must be tuned to the same channel.
Camera:
Select the channel with the channel selector at the back of the camera.
Remove the rubber plug and use a small screwdriver to tune in the desired channel
(see Figure 3).
Screen:
Set the DIP lever to “On” for the channels which are to be used (one for
each camera)
Channels 1-4 are channels for cameras and 5 is intended for setting the time for
switching between the cameras (see Fig. 4).
