8
E
N
G
LI
S
H
fig. 7
Mains adaptor
Connect the mains adaptor marked “Output: 13.5V DC” to an electrical socket and
the DC plug to the [DC IN] connection on the back of the screen.
Placing
Place the screen on a suitable surface with a dark background and direct the aerial
towards the camera.
4.2 Camera
Assembly
The camera can be assembled on a wall or a ceiling. Test the radio transference so
that you have a picture on the screen before you assemble the camera permanent-
ly. If there is interference you may need to change to an alternative camera position
(see the section on fault finding). The camera can be used both inside and outside
but should be weather-proofed for use outdoors so that the camera is not directly
exposed to rain.
Power supply
Mains adaptor 9 V DC, 500 mA (plus (+) in the centre) with long cables.
