E
N
G
LI
S
H
Tape, insulation tape etc.
fig. 9
fig. 8
Positioning
a) Use the camera’s wall mounts as a template and mark out two bore holes
(86mm between holes) where the camera is to be assembled. Consider where
the camera cable should be assembled.
b) Assemble the camera with the screws supplied, drill holes for the cable (min
Ø13mm) (the handle has a hole which is meant for passing cable through)
c) Pull the cable through the hole, seal the hole where required.
d) Connect the camera cable with the mains adaptor cable, fix and seal the
connection with tape, insulation tape etc. (see fig. 9).
e) Connect the mains adaptor to an electrical socket.
