4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• Moving to another work area.
• Passing the tool to another person.
13. Never use the tool if it is defective or operating abnormally.
14. The tool should be serviced if required by qualified service personnel.
15. Avoid damaging the tool for example by applying excessive force.
16. ALWAYS maintain the tool with care. Keep it clean for the best and safest
performance.
17. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
18. Do not force or misuse the tool. It will do a better and safer job at the rate
for which it was designed.
19. Do not remove any labels. Damaged labels should be replaced.
20. This tool vibrates with use. Vibration may be harmful to your hands or arms.
Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek
medical advice before resuming use.
IMPACT WRENCH SAFETY INSTRUCTIONS
1. Always
use the impact wrench as described in these instructions.
2. Always
ensure the wrench is not moving and disconnected from the air
supply when changing sockets etc. Use only Impact Wrench sockets....DO
NOT use standard sockets.
3. Always
finish tightening wheel nuts or engine parts with a torque wrench or
suitable spanner to the correct torque as recommended by the vehicle
manufacturer.
4. Always
avoid excessive use of the impact wrench. When tightening a nut
or bolt, only allow the wrench to impact briefly to avoid overtightening.
5. Always
ensure that the socket is correctly installed before switching on.
6. Always
only use sockets which are specified for impact wrench use.
7. Due to the possible presence of asbestos dust from vehicle brake linings,
always wear suitable respiratory protection.
8. Always
disconnect from the air supply when changing sockets or when the
wrench is not required for immediate use to avoid accidental starting
9. Never carry the wrench by the air supply hose.
10. Always
use both hands to control the wrench.
11. Always ensure the wrench has stopped before putting it down.
Summary of Contents for X-Pro CAT163
Page 16: ......
