8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
FITTING AN IMPACT SOCKET
1. Select the impact socket you
require, which must be in good
condition and fit the tool exactly.
2. Push the socket onto the square
drive shaft.
SETTING THE FORWARD/REVERSE ROTATION
Forward/Reverse rotation is selected
by pushing the combined Forward/
Reverse knob/power regulator in the
direction shown by the arrow on the
back of the wrench.
1. For normal tightening, the wrench
should be operated in the forward
(F) direction at position 1, 2 or 3.
2. For loosening, the wrench should
be operated in the reverse (R)
direction.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
WARNING: WAIT UNTIL THE ANVIL HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE BUTTON.
Summary of Contents for X-Pro CAT163
Page 16: ......
