9
THE HIGH PRESSURE HOSE
CONNECT THE HOSE TO THE GUN
1. Slide the connector on the hose
backwards.
2. Push the gun into the connector.
3. Release the connector.
NOTE:
Make sure the connection is
secure.
CONNECT THE HOSE TO THE POWER WASHER
1. Slide the connector on the power
washer towards the machine.
2. Push the hose into the connector.
3. Release the connector.
NOTE:
Make sure the connection is
secure.
CONNECT WATER SOURCE
1. Connect the water supply hose to
the water inlet.
NOTE:
Water source must provide
a minimum of 5 gallons per
minute at 20 p.s.i.
NOTE:
Make sure the water supply
hose is screwed on tightly.
GUN/HOSE HOOK
1. Fit the hook into the position
shown and secure using the
washers and nuts on the bracket.
Summary of Contents for Power Wash PLS190
