8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING THE GUN TO THE HOSE
Connect the gun to the hose by
screwing on the connector and
tightening with a 17 mm spanner.
CONNECTING THE MAINS WATER SUPPLY
NOTE:
Always follow any regulations of
your local water supplier.
1. Screw the inlet adaptor to the
water inlet as shown.
2. Connect the mains water supply
hose to the inlet adaptor. A
standard garden hose is suitable.
• It is recommended to use a
reinforced hose with an inner
diameter of at least 10 mm
available from your CLARKE
dealer.
• Ensure the water connection is secure.
NOTE:
The water source must provide
a minimum of 6.6 litres per minute
at not more than 40°C.
FILLING WITH DETERGENT
If you intend to use detergent:
1. Remove the detergent filler cap
located at the rear of the pressure
washer and fill with detergent.
• The detergent level should be
visible through the window in
the back of the machine. (max
capacity 500ml)
2. Replace cap before use.
Summary of Contents for JET 8000
Page 24: ......
