11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE SPRAY
The nozzle is adjustable to allow you to adjust the spray from a narrow jet of
water to a wide spray.
To adjust the nozzle, proceed as
follows:
1. Hold the shaft of the lance in one
hand.
2. Twist the nozzle with the other
hand.
3. To vary the spray between narrow
and wide, turn the nozzle
anticlockwise through 180
o
.
ADJUSTING THE PRESSURE
There are three ways to adjust the
pressure of the water:
1. Slide the nozzle forwards to lower
the pressure.
2. Back away from the surface
being cleaned. The further away
you are the less the pressure will
be on the surface being cleaned.
3. Adjust the spray to a wider angle.
APPLYING CHEMICALS AND CLEANING SOLVENTS
1. Ensure the trigger is locked.
2. Remove the cap from the detergent container.
3. Fill the container with a suitable bio-degradable detergent.
4. Replace the cap.
5. Squeeze the trigger.
6. Pull the adjusting sleeve forward to set the required spray pressure.
7. Start washing.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH, CLEAN WATER
AND SEEK MEDICAL ADVICE IF REQUIRED.
Summary of Contents for JET 8000
Page 24: ......
