7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
Unpack your power washer and check to ensure all the items listed on page 2
are present.
UNFOLDING THE HOSE REEL HANDLE
1. Open the reel handle from its
folded position before use.
2. Release the hose from the
retaining clip on the hose reel,
then pull the hose from the reel to
unwind whatever length is
required.
• Winding the handle clockwise
will reduce the length of the
hose.
• If the spray gun/lance assembly is not attached, the hose can be
secured in the retaining clip when the hose is re-wound.
USING THE CARRYING HANDLE
1. Press and hold the centre button
on the telescopic handle to
unlock it.
• This will enable the handle to
extend and retract.
ASSEMBLING THE LANCE
The lance must be fitted to the gun
assembly before use.
1. Assemble by screwing the end of
the lance into the gun assembly.
2. Tighten the locking nut using a 22
mm spanner.
3. Slide the plastic cap into position.
Summary of Contents for JET 8000
Page 24: ......
