
A-8 / ENGLISH
A-8
- FORM NO. 56091023 - PBU Propane Burnisher with Dust Control
MAINTENANCE OF EQUIPMENT
WARNING!
The proper maintenance of equipment is vital to safe operation. LPG engines are dependent on engine tune up, and air
fi
lter replacement. CO
concentration (production) skyrockets when the air to fuel ratio becomes fuel rich. Follow the recommended Maintenance Schedule for the engine
found in the Engine Operator/Owner Manual as well as the Maintenance And Adjustments schedule found in the Propane Floor Equipment
Operator’s Manual that were supplied with the equipment.
CO SAFETY EQUIPMENT AVAILABLE BY MANUFACTURER
Carb Gard automated emissions monitoring will shut down the engine when high emissions are detected.
•
Three-way type catalytic converter to scrub CO, Hydro Carbons (HC), and Nitrides of Oxygen (NOx) from the engine exhaust providing the lowest possible
•
emissions
NOTE: Dead Stop CO Detector provided in Literature Pack. Replacement part number 98758A.
•
CO SAFETY EQUIPMENT AVAILABLE ON THE MARKET
Positive or negative pressure high volume ventilation blower capable of exchanging complete room air volume to maintain CO levels below OSHA exposure
•
limits.
Digital combustion analyzers for tail pipe emissions monitoring
•
OSHA Approved CO Monitor
•
SPECIFICATIONS:
Model
21KBCATCLDC
27KBCATCLDC
Part Number
56381408
56381409
Pad Size
21” (53 CM)
27” ( CM)
Engine
603CC KAWASAKI
603CC KAWASAKI
Catalytic Muf
fl
er
Yes
Yes
Carb Gard
Yes
Yes
Clutch
Centrifugal
Centrifugal
Pad Speed
2100 RPM
1500 RPM
Propane Tank
20 lb. (9.1 kg) Capacity, 80% Safety
fi
ll
20 lb. (9.1 kg) Capacity, 80% Safety
fi
ll
Auto Fuel Shutoff
Yes
Yes
Low Oil Shutdown
Yes
Yes
Hour Meter
Yes
Yes
Sound Pressure (ISO 11201)
87 dB LpA, 3dB KpA
87 dB LpA, 3dB KpA
Productivity Rate
25,000 ft
2
/hr (2,322 m
2
/hr)
33,000 ft
2
/hr (3,066 m
2
/hr)
Agency Approvals
EPA plus UL Approved Propane Components
EPA plus UL Approved Propane Components
CARB Certi
fi
ed
(California Air Resource Board)
Yes
Yes
Weight
292 lbs / 132.4 kg
302 lbs / 137 kg
Length
66” (167.4 cm)
69” (175.3 cm)
Width
23.3” (59 cm)
29.5” (74.9 cm)
Height
43” (109.2 cm)
43” (109.2 cm)
Warranty
2 Years Parts & Labor
2 Years Parts & Labor
Summary of Contents for 56381408 (21KBCATCLDC)
