English
48
VX401E/VZ401E
Ins
tall
atio
n m
an
ua
l
5. Installing the Main Unit
This unit is designed for fixed installation in the
dashboard.
1. When installing the main unit in NISSAN
vehicles, use the parts attached to the unit
and follow the instructions in Figure 6. When
installing the main unit in TOYOTA vehicles,
use the parts attached to the vehicle and
follow the instructions in Figure 7.
2. Wire as shown in Section 7.
3. Reassemble and secure the unit in the
dashboard and set the face panel and center
panel.
Installing the Main Unit in NISSAN Vehicle
Note:
*1: Position the face panel with its wide edge at the bottom.
Fit the edge into the groove of the main unit.
Figure 5
For NISSAN vehicle
Mounting Screw Holes (Side View of the Main Unit)
For TOYOTA vehicle
Figure 6
6- Spacer (thickness: 1mm)
6- Flat head screws
(M5x8)
(Attached to the main unit)
Trim ring (*1)
Mounting bracket
(1 pair for the left and right sides)
Main Unit
VX_VZ401E_EN_GE_FR_IT_ES_multibook.indb 48
4.8.2010 22:03:19