English
English
Owner’s Manual
VX401E/VZ401E
17
6. OPERATIONS
Basic Operations
Note:
• Be sure to read this chapter referring to the
chapter “3. CONTROLS”
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
Turning ON and OFF the Power
Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you drain
the car’s battery too far, you may not be able
to start the engine and this can reduce the
service life of the battery.
1. Start the engine. The power button
illumination on the unit will light up.
2. Press the
[
SRC]
button on the unit to turn
ON the power. Or press the
[SRC/POWER]
button on the remote control to turn ON the
power.
3. To turn OFF the power, press and hold the
[
SRC]
power button on the unit for more
than 2 seconds. Or press the
[SRC/POWER]
button on the remote control to turn OFF the
power for more than 1 seconds.
Engine ON
position
Opening and Closing Operational Panel
Press
[OPEN]
button on the unit (VZ401E).
The operational panel will be open.
Press the same button again to close the panel.
CAUTION
• Do not move the operation panel forcibly
or apply strong force to the operation
panel.
• When the operation panel is operating,
be careful not to get your hand or finger
caught between the operation panel and
main unit or its mechanical parts.
• The driver should not operate the
operation panel while driving.
Adjusting the Angle of the Operational Panel
Touch the settings key to enter into the Monitor
Adjust to adjust the desired angle (VZ401E).
Selecting a Mode
1. Touch the desired source key you wish to
change to: Tuner, Disc, USB, AUX IN, AV IN,
iPod/iPhone, etc.
*External equipment not connected to this
unit is not displayed.
Touch the
[10:00]
to display the time.
2. Press the
[ ]
SRC button to scroll through
the available sources.
VX_VZ401E_EN_GE_FR_IT_ES_multibook.indb 17
4.8.2010 22:02:26
