manualshive.com logo in svg

Clarion Ungo Pro Security RK1, Installation Manual

Share
Download
Clarion Ungo Pro Security RK1 Installation Manual Download Page 30

30

remote coding will be exited if:

●

Ignition is turned off.

●

Program switch is pressed too many times.

●

More than 15 seconds elapses between programming steps.

One long horn honk indicates that remote coding has been exited.

remote configurations

The remotes can be programmed with the separate or single button arm/disarm configurations by
using the Auto-learn functions in the remote coding.

button configuration

controls the 

Lock/Panic ON/Panic OFF

function.

controls the 

Unlock

function.

controls 

Silent Lock/Unlock 

and an 

Auxiliary Output

.

controls 

Remote Start

.

/

controls 

Timer

mode.

+ controls 

Turbo/Short

Run.

+ controls 

Channel 4

output.

module programming

The system features programmed dictates how the unit operates. Due to the number of fea-
tures, the features have been divided into two menus. It is possible to access and change any

of the feature settings using the Override switch. However, this process can be greatly simplified by
using the Pro Security Programmer. Any of the settings can be changed and then assigned to one of

Summary of Contents for Ungo Pro Security RK1















































Reviews:

No comments

Brands by name

Popular brands

Load more brands