9
3.
Remove the front cover by rotating it counterclockwise, as
shown in above (right).
4.
Insert the SD card to the SD card slot.
5.
Place the cover back on the front of the camera and
rotate it clockwise, as shown. Reinstall the sun shield
according to the arrow direction, as shown below.
6.
Slide the sun shield according to the arrow direction, as
shown below.
7.
Rotate the TW M3 × 5 screw clockwise to tighten the sun
shield.
SD card slot
Summary of Contents for CV-M3B10-ODI
