Clare Controls CV-M3B10-ODI, Installation Manual

Page: 8 / 40

2
WARNINGS
 In the use of the product, you must be in strict compliance
with the electrical safety regulations of the nation and
region.
 Refer to the technical specifications for detailed
information.
 Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 24 VAC
or 12 VDC according to the IEC60950-1 standard. Refer
to the technical specifications for detailed information.
 Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire hazard.
 Make sure that the plug is firmly connected to the power
socket.
 When the product is mounted on the wall or ceiling, the
device should be firmly fixed.
 If smoke, odor, or noise rise from the device, turn off the
power at once and unplug the power cable. Contact the
service center.
 If the product does not work properly, contact your dealer
or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume
any responsibility for problems caused by unauthorized
repair or maintenance.)