Clare Controls CV-M3B10-ODI, Installation Manual

Page: 20 / 40

14
To mount with a junction box:
1. Attach the drill template to the wall where the camera is to
be mounted.
2. Drill holes in the wall according to the number two holes
of the drill template.
3. If you need to route cables through the wall, cut a cable
hole according to the drill template. Skip this step, if you
want to route the cables on the surface of the wall or
ceiling.
4. Secure the junction box to the wall with expansion
screws.
5. Route the cables of the camera.
6. Connect the video output connector to the monitor and
the power connector to the power supply.
7. Adjust the image and focus. See “View angle adjusting”
and “Zoom and focus adjusting.”