Clare Controls CV-M3B10-ODI, Installation Manual

Page: 9 / 40

3
CAUTIONS
 Make sure the power supply voltage is correct before
using the camera.
 Do not drop the camera or subject it to physical shock.
 Do not touch CMOS modules with fingers. If cleaning is
necessary, use a clean cloth with a bit of ethanol and
wipe it gently. If the camera will not be used for an
extended period, replace the lens cap to protect the
CMOS from dirt.
 Do not aim the camera at the sun or exceedingly bright
places. Blooming or smearing may occur (which is not a
malfunction), and affect the endurance of CMOS at the
same time.
 The CMOS may be burned out by a laser beam, so when
laser equipment is in use, make sure that the surface of
CMOS will not be exposed to the laser beam.
 Do not expose the camera to high electromagnetic
radiation, extremely hot or cold environments (the
operating temperature should be -30 to +60 ℃ ), dusty or
damp locations.
 To avoid heat accumulation, good ventilation is required
for operating environment.
 Keep the camera away from liquid while in use.
 When returning a camera, pack it in its original packing, or
similar packing materials.
 Improper use or replacement of the battery may result in
hazard of explosion. Replace it with the same or
equivalent type only. Dispose of used batteries according
to the instructions provided by the battery manufacturer.