12
13
2. How To Use
Notes:
Ensure that no one can be injured by the elevated temperatures and that the installa-
tion can withstand the strain.
The exiting water and the tap become very hot! The water steam should not be
inhaled.
Flow Limit:
Setting of flow rate limitation.
Setting options:
“OFF”
no flow rate limitation (motor valve deactivated)
“AUTO” automatic adjustment, i.e. flow rate is limited in a way so that the selected
outlet temperature is reached
“ECO”
flow rate limitation to max. 8.0 l/min
e.g. “9.0” limitation to a freely selectable value between 4.5 and 25 l/min
Note: If the Eco function has been activated in the menu “Savings”, the flow is auto-
matically set to “ECO”. Changing the flow to a higher value than 8 l/min deactivates
the Eco function
Factory Settings:
All factory settings can be recalled:
• Restart Device: Set the temperature back to factory setting and restart the appli-
ance.
• Factory Reset: Deletes all entries made by the user inclusive statistics.
Synchronize Statistics:
Use this function to reload the statistical data.
Devices:
All settings for operation with the app and for integrating the DSN into a
Wi-Fi network are made here. For more information, see chapter: “4. CLAGE app
Smart Control”.
Software Info
: Information about the operating system, the imprint and licenses can
be viewed here. The
“Expert Mode”
can also be activated here. In the Expert Mode
you have access to sensitive system settings and functions.
INFO/DEVICE INFORMATION
The current status and appliance data is listed here. By wiping you can scroll through
the different information values.
2. How To Use
Power limit
If the full output of the instantaneous water heater DSN does not suffice to heat the
tapped quantity of water, the control valve automatically reduces the flow rate so that
the set temperature is reached.
How to Save Energy
Set the exact temperature you need on the appliance and open the hot water tap.
Once you feel that the water is too hot, do not add any cold water and, instead, enter
a lower temperature on the appliance. If you were to add cold water, the water already
heated would cool down again and valuable energy would be wasted. Moreover, the
cold water added in the tap is not covered by the control range of the electronic cir-
cuitry, with the result that temperature constancy is no longer guaranteed.
SAVINGS
Here, you can determine the parameters for the costs in the consumption statistics
and activate / deactivate the ECO Mode. You can select a currency symbol under
“Settings”(P.9).
Electricity Tariff (HK$/kWh):
Indicate the electricity price from your electricity com-
pany.
Water Tariff (HK$/m³):
Indicate the water price from your water company.
ECO Settings:
In Eco mode the outlet temperatures are limited to an energy-efficient
value ( handwash = 35 °C, shower = 38 °C, bath = 42 °C,
hot water = 48 °C).
Additionally the water flow is limited to 8 l/min.
USER
Up to eight users can enter their names and select their own profile image. This
appears together with the first letters of the name in the main screen.
In the main control, every user can set up and save his own desired temperatures for
the different applications.
Tap the
+
symbol to add more profiles, use the pen to edit existing profiles and tap the
×
symbol to delete the adjacent user profile.
Top-up Heating
When operating with preheated water (e.g. with solar systems), you must ensure that
the inlet temperature does not exceed 70 °C.
If the inlet temperature exceeds the setpoint, the appliance is not providing any out-
put. The symbol is displayed in the main screen
