clage FX Next, Operating And Installation Instructions

Page: 34 / 208

24
EN
Turning off the tap is always necessary, the function must therefore not
be used unsupervised .
Before using the bath, make sure that the water temperature is what you
want it to be .
Hint:
The water amount of the last draw-off is stored in the “Statistics”
menu . To determine the necessary amount of water for your bathtub, fill
it with warm water, then select “Statistics” in the main menu and read
out the value of this last drawing . Enter this value in the automatic func-
tion “Fill-Up” to use it for the next bathtub filling .
Note: In the event of a power cut whilst the automatic is running accord-
ing to the fill quantity, the water flow is stopped by the motor valve.
After power is restored the valve remains closed a prompt appears on the
display until the prompt is acknowledged by tapping on “OK”.
7. How to use
Statistics
In the statistics the consumption and usage data are captured by the
appliance and displayed in graph format:
Water consumption
Power consumption
Total consumption costs
Select or to scroll through the different periods . The consump-
tions are displayed over a period from the last drawing of water or the
total consumption .
Note: The consumption data are not suitable for billing purposes.