5-2.Standard setting mode
<How to enter to standard setting mode>
<Switch output>
Having 2 pieces of switch output, 7 operation patterns and stop of
operation can be set.
<Data setting of switch output function>
<Switch output forcible ON mode>
<0 point adjustment mode>
0 point adjustment setting display.
To instantaneous flow rate display
Press once.
(determination)
Press once.
Caution Always adjust 0 point without flow.
Note: If fluid flows during zero adjustment setting, “E 02” is indicated.
Press simultaneously
(adjusted value reading)
Adjustment value display
Integrated flow rate
ON
OFF
Set point
Flow rate
ON
OFF
Lower limit Upper limit
ON
OFF
Flow rate
Lower limit Upper limit
ON
OFF
Flow rate
Lower limit Upper limit
ON
OFF
Flow rate
Lower limit Upper limit
ON
OFF
Integrated flow rate
Set point
ON
OFF
Pulse rate
40msec
Integrated flow rate
ｍＬ
/
ｍｉｎ
＜
Instantaneous flow rate display
＞
Press for 3 sec.
<Switch output >
Press once.
<Forcible output function>
Press once.
<0 point adjustment>
Press once.
To instantaneous flow rate display
To switch output
setting display
Press once. (determination)
To forcible output
setting display
Press once .(determination)
To 0 point adjustment
setting display.
Press once .(determination)
ｍＬ
/
ｍｉｎ
Flash
At instantaneous flow rate display, press
key for 3 sec. to enter to standard
setting mode.
Forcible output setting display
To instantaneous flow rate display
Press once.
２
１
１
２
Being held down (CH1 output ON)
Being held down (CH2 output ON)
Being held down (CH1 and CH2 output ON)
Switch output setting display
<Switch output OFF>
<Window operation [1]>
<Window operation [2]>
<Hysteresis operation [1]>
<Hysteresis operation [2]>
<Integrated output [1]>
<Integrated output [2]>
<Integrated pulse>
CH1 operation mode change
Press once. (determination)
CH1 ON/OFF data setting
ｍＬ
/
ｍｉｎ
<Lower limit data setting>
<Upper limit data setting>
Count UP
Count down
Press once. (determination)
CH2 operation mode change (Set same as CH1)
CH2 ON/OFF data setting (Set same as CH1)
Press once. (determination)
Press once. (determination)
To instantaneous flow rate display
ｍＬ
/
ｍｉｎ
Press key once to increase by one figure
and press it continuously to keep set figure increased.
Press or key to select operation mode.
Press key to set.
Press key once to decrease by one figure
and press it continuously to keep set figure decreased.
－4－
Operation pattern
Description
Operation waveform
Window
operation[1]
(Range inside ON)
The switch turns ON
when the level is
within the designated
flow rate range.
Window
operation[2]
(Range outside ON)
The switch turns ON
when the level is not
within the designated
flow rate range.
Hysteresis
operation[1]
(Flow rate small
side ON)
ON when lower than
set point. Hysteresis
can be arbitrarily set.
Hysteresis
operation[2]
(Flow rate large side
ON)
ON when higher than
set point. Hysteresis
can be arbitrarily set.
Integrated output[1]
（
ON when higher
than set
integration
）
The switch turns ON
at the set integrated
flow.
Integrated output[2]
（
OFF when higher
than set
integration
）
The switch turns OFF
at the set integrated
flow.
Integrated pulse
The integrated pulse
is output during
integration.
See
specifications for
details on the pulse
output rate.
Switch output OFF
Switch output OFF
Note: Hysteresis is provided on upper and lower limit of window operation automatically.
The hysteresis can be fixed in 8 steps. Refer to <Hysteresis fixed value selection>
in <Detailed setting mode>.
Discontinue
