background image

 

CAUTION

Projectors may cause severe injuries when crashing down

If you have doubted concerning 

the safety of a possible installation, do NOT install the projector! 

Before rigging make sure that the installation area can hold a minimum point load of 10 times the 

projector’s weight. 

DANGER OF FIRE! When installing the device, make sure there is no highly-inflammable material 

(decoration articles, etc.)Within a distance of min.0.5 m. 
 

CAUTION

Use 2 appropriate clamps to rig the fixture on the truss. Follow the instructions 

mentioned at the bottom of the base. Make sure that the device is fixed properly! Ensure that the 
structure (truss) to which you are attaching the fixtures is secure.

 

The Moving-Head can be placed directly on the floor or rigged in any orientation on a truss without 

altering its operation character-rustics(see the drawing).There are tow possibility how to fix the 
MH-1200W on a trusses: with the clam brackets (part of delivery) or mounting plate (is not included in 
deliver, only on demand. Use the rigging clamps (not included) with screws M 10 or M12. 

For overhead use, always install a safety-rope that can hold at least 10 times the weight of the fixture. 
You must only use safety-ropes with screw-on carbines.   

Connection with the mains

 

Connect the device to the mains with the power-plug. 
The occupation of the connection-cables is as follow

 

Cable Pin 

International 

Brown     

Live    

Blue Neutral 

Yellow/green 

Earth    

 

 
The earth has to be connected

   

 

DANGER TO LIFE

 

Before taking into operation for the first time, the installation has to be approved by an expert

 

 

DMX-512 connection/connection between fixtures 
The wires must not come into contact with each other; otherwise the fixtures will not work at all, 
or will not work properly.

 

0nly use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to controller with the 
fixture or one fixture with anther.   
 

Occupation of the XLR-connection:

 

DMX-output      DMX-input 
XLR mounting-socket:      XLR mounting-plug: 
 
1-Ground 
2-Signal (-) 
3-Signal (+) 

6

Summary of Contents for CK407










Reviews: