background image

9

                                                      DANGER TO LIFE! 
    Disconnect from mains before starting maintenance operation!   
 

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use 

alcohol or solvents. 

CAUTION! The lens has to be replaced when it is obviously damaged, so that its function is repaire, 

e.g. Due to cracks or deep scratches! 

The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing 

the light-output very quickly. The cooling-fans should be cleaned monthly. 

The gobos may be cleaned with a soft brsh.The interior of the fixture should be cleaned at least 

annually using a vacuum-cleaner or an air-jet. 

The diachronic color-filters, the gobo-wheel and the internal lenses should be cleaned monthly. 

To ensure a proper function of the gobo-wheel, we recommend lubrication in six month intervals. The 

quantity of oil must not be excessive in order to avoid that oil runs out when the gobo-wheel rotates. 

There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and 

service operations are only to be carried out by authorized dealers. 

 

Replacing the fuse

 

If the lamp burns out, the fine-wire fuse of the device might fuse too.Only replace the fuse of same type 
and rating? Before replacing the fuse, unplug mains lead. 
Procedure

 

 
STEP 1: Unscrew the fuse holder on the rear panel with a fitting screwdriver from the housing 

(anti-clockwise) 

STEP 2: Remove the old fuse from the fuse holder. 
STEP 3: Install the new fuse in the fuse holder. 
STEP 4: Replace the fuse holder. 
 

Should you need any spare parts, please use genuine parts. 

If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers 

only in order to avoid hazards. 

Should you have further questions, please contact your dealer. 

 
We hope you will enjoy the light; we can assure you that you will enjoy this device for years if you 
follow the instructions given in this manual. 

 

 

 

 

Summary of Contents for CK407










Reviews: