Introduction
Thank you for having chosen our MOVING HEAD .You acquired a versatile, powerful and
intelligent lighting-effect. Unpack your MOVING HEAD and make sure that there are no
damages caused by transportation. Should there be any, please consult your local dealer
and do not take the device into operation.
Multi-function MOVING HEAD spot:
●Color system:1 color-wheel. Color-wheel has 7 kinds of different color, dichroic
filters white;
●Gobo-wheel have 7 rotating metal-gobos. The rotating gobos can be turn by 360
●Combined shutter/dimmer unit allowing very smooth dimming and strobe effect 1-10
flash/s.
●Addressing, special functions setting, effects calibration via control panel with
4-digitLED display.
●Pan-movement rang 530°,Tilt-movement rang 280°.
●
6 high-quality stepper-motors for smooth movement.
●
Self-resetable thermo-fuse.
●
For PHILIPS MSD 150W
，
or OSRAM MSD 150 lamp
SAFETY INSTRUCTIONS
CAUTION
！
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wire!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Important
：
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
●
If the device has been exposed to drastic temperature fluctuation(e.g. after transportation),
●
This device falls under protection-class 1.The power plug must only be plugged into protection class 1
outlet. Never let the power-cord come into contact with other cables! Handle the power-cord all
connections with the mains with particular caution!
●Make sure that the available voltage is not higher than stated on the rear panel.
●
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
●
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
●
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
3
