Civemasa Implementos Agrícolas
STAC M 500
21
Adjustments and operations
Shanks depth adjustment
NOTE
A
A
The shanks working depth is controlled through the wheels by the hydraulic cylinders
activation. To set the shanks working depth, use the cylinder stops (A), which will limit the
cylinder rods movement.
The cylinder stops are included with the equipment. Combined, they can set several
adjustment points, being necessary to be used on both cylinders.
After the adjustment, the depth will always be the same; this occurs because the stops
are limiting the cylinder movement, therefore preventing the wheels from oscillate and always
keeping the same depth.
• The depth will be lesser if more cylinder stops are used.
• The working depth will be indicated by the scale on the shanks.
Summary of Contents for STAC M 500
Page 1: ...OPERATOR S MANUAL STAC M 500 STAC M 500...
Page 45: ...www civemasa com br...
