Civemasa Implementos Agrícolas
36
STAC M 500
Hydraulic cylinder assembly
Maintenance
IMPORTANT
B
B
C
C
D
D
A
A
E
E
NOTE Do not clamp rod by chrome surface.
Reassembly:
1) Reinstall rod through gland (E) and end cap (A);
2) Secure piston (C) to rod with lock nut (D). Torque lock nut to proper value (consult
torque table on the "important data" section);
3) Lube inside of barrel, piston seals, and gland seals with hydraulic oil;
4) With cylinder body held gently, insert the inner assemblies (B) using a slight rocking
motion;
5) Apply Loctite 277 before installing the cylinder end cap (A);
6) Torque cylinder end cap (A) to 400 lb.ft (600 N.m).
Insert the gland (E) on the cylinder head and align it with the tube so
it will fit correctly on the cylinder barrel.
Summary of Contents for STAC M 500
Page 1: ...OPERATOR S MANUAL STAC M 500 STAC M 500...
Page 45: ...www civemasa com br...
