Civemasa Implementos Agrícolas
STAC M 500
17
Set-up instructions
Preparing the tractor
Preparing the disk harrow
Hitching to the tractor
A
A
B
B
C
C
D
D
ATTENTION
The following instructions must be carefully observed in order to get the best work
performance.
The addition of ballast water in the tires and a set of weights on the front part and rear
wheels of the tractor are the most used ways to increase the soil traction and give greater
stability to the tractor. Check if the tractor is in good condition before using it.
Check the condition of all parts, retightening nuts and bolts, especially from the disc
gangs. These will damage the axle and other components when working loose.
Check the tires inflation and keep the same pressure on all of them.
Lubricate all grease fittings appropriately. (See 'lubrication' instructions).
Couple the equipment to the tractor by hitching the drawbar (A) to the hitch bar (B)
using a pin (C) and connect the hydraulic cylinder hoses (D) to the tractor remote control
couplers.
If necessary, use the extensor arm (E) to facilitate hitching.
• The tractor drawbar must remain fixed and centralized.
• The hitch pin (C) is not included with some equipment models.
• During transportation, the hydraulic lower arms must remain lifted.
Summary of Contents for STAC M 500
Page 1: ...OPERATOR S MANUAL STAC M 500 STAC M 500...
Page 45: ...www civemasa com br...
